Krag Collectors Association Forum Archive
General >> Older threads >> New Inherited Norweigan Krag
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1260917862

Message started by Needanswers on Dec 15th, 2009 at 10:57pm

Title: New Inherited Norweigan Krag
Post by Needanswers on Dec 15th, 2009 at 10:57pm
Hi everyone, I have just inherited a norweigan krag, and although I remember seeing it in my childhood, I never asked questions about it. I would like to know what kind of cartridge to fire through it. It also came with 40 rounds of 6.5x55m shells, made in yugoslavia. They are 139 grain. Can anyone tell me whether this is the proper round to be shooting through this gun.  It is also stamped 1914. Anyone have any insight into this firearm?? Thanks all

Title: Re: New Inherited Norweigan Krag
Post by dmg4 on Dec 16th, 2009 at 5:49pm
We need a bit more information.  Can you provide some pictures of the rifle, or a more complete description.  Look at some pictures of the M1894 rifle and 1912 carbine and see if it look more like one than the other.  What is the barrel length?  Has it been "sporterized"?

Yes, 6.5X55 is the correct ammo, BUT there is some genuine concern regarding the use of modern high-pressure ammo in these rifles.  You really should not use ammo designed for the Swedish Mauser, but lower-pressure (<40,000 psi) ammo designed or hand-loaded for the Krag.

Title: Re: New Inherited Norweigan Krag
Post by Needanswers on Dec 16th, 2009 at 10:45pm
i will post pics either tonight or tomorrow...and hopefully that will help.

Title: Re: New Inherited Norweigan Krag
Post by stevie on Jan 2nd, 2010 at 7:33am
139 grain bullet --
from wikipedia article:
    * 6.5x55 a 6.5 mm (0.256 in) rimless round. Most variations are loaded for a chamber pressure of 350 MPa (roughly 51000 lbf/inē). Early rounds, with a 10.1 grams (156 grains) long round nosed bullet (B-projectile) had a muzzle velocity of around 700 m/s (roughly 2300 ft/s), while later rounds with a 9 grams (139 grains) spitzer bullet (D-projectile) offered a muzzle velocity up to 870 m/s (2854 ft/s).[1]

Note that 51Klbf would be altogether too hot for the US Krag which has a larger base and has intended clearance between bolt handle base and receiver, those tend to crack lugs with high pressure loads. 

The machining on Norwegian version is different, bolt handle base is supposed to bear on receiver as well as bolt locking lug, to give effectively 2 locking lugs -- it is supposed to be able to withstand higher pressure than US Krag.



Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2026. All Rights Reserved.