Krag Collectors Association Forum Archive | |
General >> Older threads >> Help replacing rear sight
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1328053992 Message started by Redcoat3340 on Jan 31st, 2012 at 11:53pm |
Title: Help replacing rear sight Post by Redcoat3340 on Jan 31st, 2012 at 11:53pm
I'm on the lookout for a Redfield or Pacific no-tap rear sight. My Krag has already been "sporterized," but I'd prefer not to tap the receiver.
Perhaps a couple of questions: 1. What's a fair price for the Redfield (70 KH or 70KT or 102K) or Pacific sight? There was one on eBay that went for $76.00. I stopped bidding around $70 as I wasn't sure of the going rate, and didn't want to get involved in a bidding war. (There was also one for $100, but the seller had a Paris, France address and I don't like doing international transactions.) I've got WTB's posted here, on Gunboards and Surplus Rifles, plus I look daily on eBay, Gunbroker and GunAuction. Any other places I can look? 2. If I can't find a no-tap in the next month or so, what are my other options? Anyone have a recommendation for a tapped rear sight....and how best to give my gunsmith directions as to how/where to drill the holes (I really don't want to do that!). 3. About the front sight: That needs to be replaced as a. it's a crappy one now, b. A new rear sight will mean a new front sight. Suggestions? Any other advice folks have is appreciated. Redcoat3340 |
Title: Re: Help replacing rear sight Post by butlersrangers on Feb 1st, 2012 at 12:17am
Redcoat: What kind of front sight does your Krag have? We never saw a successful picture of your rifle except the 1st one that shows the rear sight 'amidships'. Take time on the 'no-drill' peep sight. Redfields and Pacifics show up often on ebay and GunBroker $75-$100 (search - Krag).
|
Title: Re: Help replacing rear sight Post by Redcoat3340 on Feb 1st, 2012 at 12:45am
Here's the front sight. It wiggles. Sorry for the blurry picture, but it's the sight wiggling. (I'll take an infocus one later and post it.) There was a dovetail cut into the barrel to accomodate this. I'll either just ignore it and put a sight with a "band" around the whole muzzel, or use the dovetail, depending on my gunsmith.
|
Title: Re: Help replacing rear sight Post by Redcoat3340 on Feb 1st, 2012 at 12:45am
That's an awful pic...I'll replace asap.
|
Title: Re: Help replacing rear sight Post by Redcoat3340 on Feb 1st, 2012 at 12:51am
Here's a better picture of the front sight.
|
Title: Re: Help replacing rear sight Post by butlersrangers on Feb 1st, 2012 at 3:14am
That's an awful sight, but I would just utilize the dovetail with a new sight or maybe just a new blade in the present base.
|
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |