Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> Reloading for 35/40 Krag
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1445984481 Message started by FredC on Oct 27th, 2015 at 10:21pm |
Title: Reloading for 35/40 Krag Post by FredC on Oct 27th, 2015 at 10:21pm
I am within striking distance of finishing my Krag 35/40 sporter. Looking at starting loads for 308 W with heavy bullets sometimes they are right at 40K CUP and the same powder in a Krag at 40K CUP (was PSI) shows the same charges with Varget. My go to powder has been Varget for some time and Hodgdon shows;
46 grains at 42,800 CUP load for the 358W with a 220 bullet 45 Grains at 40700 CUP load for the 358W with a 225 bullet 34 grains at 27800 CUP load for 35Rem with a 220 bullet 38 grains at 33300 CUP load for 35 Rem with a 220 Bullet Hodgdon does not seem to be worried about detonation with low pressure loads in the 35Rem with Varget. Lyman's reloading book had very similar data for 30/40 308W and 358W. I will have to borrow my son's Lyman book to verify. So the question is does 40 grains as a starting load and 45 grains as a maximum load sound reasonable for Varget in a 35/40? One advantage of using loads like this in Varget, there will be no chance of getting an accidental double charge. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |