Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> 1898 krag feed issues
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1446764493 Message started by Msopher117 on Nov 5th, 2015 at 11:01pm |
Title: Re: 1898 krag feed issues Post by FredC on Nov 9th, 2015 at 8:08pm
Msopher,
There are 2 ways I could interpret the side plate being loose. 1 the screw is not pulling the plate flush with the receiver. (Something is binding and preventing the sideplate from seating, but the screw is bearing on the side plate) 2 the screw is tight but the side plate rattles. (the screw is bottoming out before it reaches the sideplate. Each way will have its own fix. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |