Krag Collectors Association Forum Archive | |
Firearms >> Sporterized and unofficial modified Krags >> Sporterizing howto
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1450216996 Message started by FredC on Dec 15th, 2015 at 10:03pm |
Title: Sporterizing howto Post by FredC on Dec 15th, 2015 at 10:03pm
I have no skills as a wood worker or stock maker but have been a machinist for many years. I am trying to attach some photos of a machine set up that others with similar skills might be able to use. If there is an interest in this and posting this stuff is not stepping on toes, I will post more on this project.
The setup shown is making an accurate hole through the stock for a large pillar that does double duty as a sight mount. This same set up could be used for a small plain pillar to hold down the front of the action when no barrel bands are used on a custom stock. If the photos are really there I will give a description of why and how in the next post. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |