Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> H4895 .30-40 Krag Load with 220 GR RN?
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1472359695 Message started by Stretch32 on Aug 28th, 2016 at 4:48am |
Title: Re: H4895 .30-40 Krag Load with 220 GR RN? Post by Stretch32 on Aug 30th, 2016 at 2:52am
Paul,
I'm trying to confirm if its IMR 4350 or H4350 at 40 grains and a 220 grain RN FMJ bullet you're using. I only see loads for this projectile with H4350 in the various reloading manuals and websites I've seen. If it's IMR 4350 I was just curious where the load is actually published so I know where to look. Also, is there any real significant difference between shooting 40 grains of H4350 vice IMR 4350 besides what I would assume would be a slightly lightly lower pressure with the H4350? I'd like to replicate the characteristics of the original .30-40 USGI round as accurately as possible while also keeping pressure down to as low as possible to give my limited brass stash a break. Thanks again. Stretch |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |