Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> Full Length Sizing vs. Neck Sizing
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1476579667 Message started by Stretch32 on Oct 16th, 2016 at 1:01am |
Title: Re: Full Length Sizing vs. Neck Sizing Post by butlersrangers on Oct 16th, 2016 at 4:27am
If you 'back off' a Full Length Sizing Die one turn in your press, it will size the case neck only and not the case body. There is then no need to buy another Die.
My experience has found Krag chambers to have been held to very close tolerances. Try partially re-sizing some of your cases by backing off the Die a turn and see if the re-formed cases will chamber in your Krag. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |