Krag Collectors Association Forum Archive

Krag Collectors Association Forum Archive
General >> Ammunition, reloading, shooting, etc >> A couple loads I'm trying http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1495212229 Message started by madsenshooter on May 19^th, 2017 at 4:43pm

Title: Re: A couple loads I'm trying
Post by madsenshooter on Jul 1^st, 2017 at 2:24am

I finally got out to shoot the loads I posted up top. Not the best of days. Still, I'm not blowing alloy on the case neck. 34.5gr of 3031 wasn't bad at all. Interestingly 41.5gr of RL19 impacted 24 clicks lower than the 3031 load. I had some other loads using NOE's 314 version of the Eagan MX2-30-H. Weight check and lubed was also 190gr. They were a bust, all over!

kragoutting_008.JPG ( 75 KB | 1 Download )

kragoutting_010.JPG ( 73 KB | 0 Downloads )