Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> Krag 26 tpi x .180 screws
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1500847041 Message started by carbon outlaw on Jul 23rd, 2017 at 9:57pm |
Title: Re: Krag 26 tpi x .180 screws Post by FredC on Jul 24th, 2017 at 9:52pm
I can see where that type die would be a little easier staring the threads straight. The normal die sold today it is difficult to get them started straight.
the 2 most important things with a lathe are #1 a rigid tool holder, and #2 a sharp tool with the correct angles. The first thing I did when I got my first lathe was ditch the lantern tool holders that came with it and build a solid tool holder. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |