Krag Collectors Association Forum Archive
Firearms >> Sporterized and unofficial modified Krags >> Banded Front Sight
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1503697264

Message started by coaspen on Aug 25th, 2017 at 9:41pm

Title: Re: Banded Front Sight
Post by butlersrangers on Aug 29th, 2017 at 4:27am
'coaspen' - Upon further examination, your bolt-sleeve is a type of 1892 bolt-sleeve that was altered at the armory to use the later type of Krag safety.

IIRC - Your sleeve 'type' was used on model 1892 Krags that were updated in the early 1900s to 'model 1896 configuration'. Your sleeve accepts the later model 1896 and 1898 'Safety'. A groove has been machined on your bolt-sleeve, so that it retains the spring-loaded pin that is part of the later safety-levers.

photos:#1. Your bolt-sleeve contrasted with #2. an earlier model 1892 type. #3. Parts to look for that should work on your Krag.

coaspen_bolt-sleeve-ed.jpg ( 175 KB | 0 Downloads )
krg-92_bolt-sleeve.jpg ( 107 KB | 0 Downloads )
IMG_8488.JPG ( 698 KB | 2 Downloads )

Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.