Krag Collectors Association Forum Archive | |
Firearms >> Sporterized and unofficial modified Krags >> Reinstall trigger/sear assembly on an 1896 KRAG
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1518112852 Message started by Zgun on Feb 8th, 2018 at 6:00pm |
Title: Re: Reinstall trigger/sear assembly on an 1896 KRAG Post by Zgun on Feb 9th, 2018 at 3:28am
Great solution Chuck with nice pics and documentation. I was going down the same path as you but no matter how hard I tried I was not able to compress that #@^% spring with a screwdriver or punch.
I used a small squeeze clamp and came up with essentially the same set of steps you described. That spring is incredibly stout and I would guess the engineers at Springfield designed a custom clamp tool for the manufacturing of the rifles. So now we have 2 methods to reinstall the sear with pics. Good luck to all who have this challenge in their future. :) Chuck, your sear was gunkier than mine, but I now have a smooth 2 stage trigger that has virtually no creep and breaks consistently at 5.6 to 5.8 pounds. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |