Krag Collectors Association Forum Archive | |
Firearms >> U.S. Military Krags >> Rear Sight Hinge Pin
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1518204275 Message started by Suredan on Feb 9th, 2018 at 7:24pm |
Title: Re: Rear Sight Hinge Pin Post by butlersrangers on Feb 10th, 2018 at 12:24am
'Suredan' - The 'leaf pin' for the 1902 Krag rear-sight measures approximately:
.115 inch diameter .660 inch length FWIW - I have made a number of these pins to salvage and complete model 1902 sights from parts. A slightly oversize finish nail works great. Original pins were made from soft steel. I 'chuck up' the nail (with head cut off) in my electric hand drill and reduce the diameter as it spins with a file and finish with emery cloth. When of a diameter that will enter the sight base, I cut the new pin to length. I dress both ends with file and emery cloth by again spinning pin in drill. BTW - S&S firearms has original pins. They are cataloged as 1903 Springfield - Rod-Bayonet parts. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |