Krag Collectors Association Forum Archive | |
Firearms >> U.S. Military Krags >> New member with a Krag project.
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1519523268 Message started by milsurpshooter on Feb 25th, 2018 at 1:47am |
Title: Re: New member with a Krag project. Post by milsurpshooter on Feb 26th, 2018 at 6:43pm
My sporterized Krag is very similar to one that was just posted about in a different thread a few days ago. Hopefully the pics will show up as attachments (I will add better pics once it's cleaned up). I will need to add a front sight and replace the bolt which has had the firing pin tip cut and bolt face welded. Other than a small crack in the heel of the stock and a generous amount of patina, I found it to be in rather great shape.
Some initial questions.... 1. Did Krag front sights fit into a dovetail cut on the barrel or were they just silver soldered/brazed onto the barrel contour? 2. Should a new bolt need to be fitted in order to headspace correctly? Can I use my Brit .303 headspace gauges to check for proper fit? Thank you in advance, - milsurpshooter |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |