Krag Collectors Association Forum Archive
General >> Ammunition, reloading, shooting, etc >> Fireforming loads
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1519839818

Message started by madsenshooter on Feb 28th, 2018 at 5:43pm

Title: Re: Fireforming loads
Post by madsenshooter on May 18th, 2018 at 1:43am
All set to go with this load in a 50rd no sighter highpower match Sunday, weather permitting.  80% chance of storms as of now.  I have one of the 3x7x32 UAG scopes on now.  Through trading and buying other things they were attached to I have several of this style scope.  All the models have changed since I got these little junkers.  Paramount to them holding zero is no flex in the ocular bell.  First thing I do is toss the rubber o-ring.  Two groups, shot the first 4, went up and left then shot the other group of 5.  I am guessing a minimum speed of 2700fps, should be 2.1" high at 100 for a 200yd zero, according to my 3rd Ed Hornady manual, which is about the same vintage as these bullets!  I'll take the my 98 rifle sight with me in case the el cheapo scope shakes loose.  I put a couple drops of thread locker on the ocular bell and lock ring.
200ydzero_001.JPG ( 74 KB | 0 Downloads )

Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.