Krag Collectors Association Forum Archive
General >> Ammunition, reloading, shooting, etc >> Thumbler Tumbler
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1531002268

Message started by Culpeper on Jul 7th, 2018 at 10:24pm

Title: Re: Thumbler Tumbler
Post by Rapidrob on Nov 5th, 2018 at 11:49pm
I've been using mine for 47 years now, am on the 2ND drive motor.
Been through a half dozen drive belts as well.
The original plastic roller bearings are long gone. I used a chassis punch and installed four sealed ball bearing instead. Works like a charm.
I only use mine as a wet tumble with S/Steel tumbling Media.
Fill it up,a few drops of Dawn,turn it on and set the timer for one hour. The brass comes out brighter than new.
Really crappy brass,like the military 6.5 Swede brass takes two hours but comes out bright and shiny as well.
Could not live without mine.

Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.