Krag Collectors Association Forum Archive
General >> Ammunition, reloading, shooting, etc >> Bought a new .30 cal mould.
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1540924316

Message started by Baltimoreed on Oct 30th, 2018 at 6:31pm

Title: Re: Bought a new .30 cal mould.
Post by butlersrangers on Oct 30th, 2018 at 8:49pm
You don't have to worry much about the 'crimp groove' with the long .30-40 case-neck, providing tension.

(The bullets in the box appear .310" diameter, which is good for most Krags).

But, the new .308" bullet diameter mold may not fit some Krag bores fully.

Maybe the mold will cast your alloy 'oversize'?

Handsome looking projectiles!

Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.