Krag Collectors Association Forum Archive | |
Firearms >> Sporterized and unofficial modified Krags >> This must be the Right Subforum!
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1544725560 Message started by AP2020 on Dec 13th, 2018 at 6:26pm |
Title: This must be the Right Subforum! Post by AP2020 on Dec 13th, 2018 at 6:26pm
(You need to Login
|
Title: Re: This must be the Right Subforum! Post by madsenshooter on Dec 15th, 2018 at 5:59am
I was surprised to see the rifle able to feed such a broad flat nosed bullet. I've loaded and shot a few lightweight hollow points, one the 140gr Nosler HPBT, the other the Federal MK319 130gr. I had to modify the nose on both of them to get reliable feeding, and that was from a 92/96. They generally feed pointed bullets better than the other models. Maybe his rifle has been worked on a bit, or he has them seated just the right depth that works. IRC, I was playing around with a little 150gr cast flat nose bullet, one that had a fat nose, and I had to seat it pretty deep. It fed ok at a very short length that I can't recall now, maybe around 2.8". I watched the beginning again, doesn't look like they're seated deep.
|
Title: Re: This must be the Right Subforum! Post by AP2020 on Dec 16th, 2018 at 8:38pm
COL = 3.010"
I just loaded some 135gr polymer coated cast bullets, 2.795" COL. They feed fine as well. I'll do a video on that load soon. |
Title: Re: This must be the Right Subforum! Post by AP2020 on Dec 23rd, 2018 at 1:30pm |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |