Krag Collectors Association Forum Archive | |
Firearms >> European Krags >> Danish Krag length of pull
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1551240633 Message started by Kooler on Feb 27th, 2019 at 4:10am |
Title: Danish Krag length of pull Post by Kooler on Feb 27th, 2019 at 4:10am
I have a Danish Krag that is sporterized and it has a rubber recoil pad on it.I think bubba might have just added it to the back of the stock. What is the length of pull on a military Danish Krag? I would like to get rid of the recoil pad if possible.
|
Title: Re: Danish Krag length of pull Post by Zgun on Feb 27th, 2019 at 4:16pm
Kooler, I will measure my rifle's length of pull and post it up tonight.
Zgun |
Title: Re: Danish Krag length of pull Post by Kooler on Mar 1st, 2019 at 12:34am
Is there anybody else who could help me? Thank you, Kooler.
|
Title: Re: Danish Krag length of pull Post by Ned Butts on Mar 1st, 2019 at 11:53am
A quick check of three shows 13 1/4" +/- a little
|
Title: Re: Danish Krag length of pull Post by Kooler on Mar 1st, 2019 at 11:07pm
Thank you Ned. Mine measures about 12 7/8 to center of butt with no plate on it. I took off the old recoil pad that was in bad shape, I`m trying to figure out what to replace it with. This will be a cast bullet only rifle so I don`t have to worry about recoil.
|
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |