Krag Collectors Association Forum Archive | |
Firearms >> Other Firearms >> My gaudy Garand
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1551815450 Message started by madsenshooter on Mar 5th, 2019 at 7:50pm |
Title: Re: My gaudy Garand Post by madsenshooter on Mar 16th, 2019 at 10:36pm
Here's a couple of the cast bullets I was shooting the other day. The ogive is .305" tapering to .307" just ahead of the top driving band. Seated down till about half that top band is in the neck, you can see why it filled the throat! I have this mold in 3 sizes, the original Eagan, and both a .314 and .316 NOE base pour version. The .316 version is for a well worn Mosin that I got cheap. I have a 6mm version of this bullet too, and was able to get very good, bug hole accuracy, from a 1/8 5r Obermeyer barreled 6x45 with the bullet going 2100fps. I sorta figured I could get the alloy going faster in a 1/10 and maintain accuracy. Now to get that gas system tightened up!
|
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |