Krag Collectors Association Forum Archive | |
Firearms >> U.S. Military Krags >> Stock bedding
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1553455605 Message started by SharpsShtr on Mar 24th, 2019 at 7:26pm |
Title: Re: Stock bedding Post by Parashooter on Mar 25th, 2019 at 4:24am SharpsShtr wrote on Mar 24th, 2019 at 7:26pm:
Probably not. The US Krag is particularly challenging because the only screws holding down the receiver are located at its stern - immediately aft of a very thin section of walnut. Consequently, forestock stability is almost totally dependent on the barrel bands. Norwegian Krags feature an additional action screw at the front of the receiver, a design enhancement reflecting recognition that the arrangement on the US model needed improvement. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |