Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> 30-40 Krag Reloading Dies
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1554167445 Message started by Mike4MSU on Apr 2nd, 2019 at 1:10am |
Title: Re: 30-40 Krag Reloading Dies Post by FredC on Jul 17th, 2019 at 10:23pm olderthansome wrote on Jun 29th, 2019 at 1:41pm:
In a recent thread one new to the forum was having feed issues in a rifle that was to be used in competition. For him adding the bevel fixed the problem. In my 35/40 with shorter than standard rounds I could only get rim lock with the muzzle aimed down, cases loaded with rims the wrong way and snapping the door closed. My cases are beveled Remington. I have not tried the Grafs case yet but the do have a smaller bevel. On mine with the rifle level or pointed up no rim lock. Others have had the problem and solved it by replacing springs and pushers. A lot of these parts have been modified by various bubbas, so rim locks are not impossible. SA did a lot of work to make the Krag mostly trouble free, little mismatches in tolerances and or worn or modified parts can ruin the magic. Some time back we saw a Krag action and barrel with cut outs for observing the internal movements, with a high speed camera and that demo piece it would be possible to understand what goes on in there when the door is closed. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |