Krag Collectors Association Forum Archive
Firearms >> European Krags >> Supposedly a Danish Krag...unsure of what I have.
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1562908191

Message started by toddm on Jul 12th, 2019 at 5:09am

Title: Re: Supposedly a Danish Krag...unsure of what I have.
Post by Chickenthief on Jul 19th, 2019 at 3:01pm

butlersrangers wrote on Jul 12th, 2019 at 5:54pm:
FWIW:

Brophy/"The Krag Rifle", (page 152) - "The 8mm Danish Cartridge was changed in 1908 to an improved pointed bullet and improved powder.

The 'Safety Catch' was introduced in 1910.

Brophy (page 154): "1. Rifle - There are four different types of barrel (A-D) ...."

Per Brophy on barrel markings, (page 156):  OP's barrel is B-style barrel marked with - (script) "B" / three sided box indicates - "sharp edges of grooves" / 'crown' is proof mark.

Follow madsenshooter's link to Gunboard's thread and discussion!

I am sure there is some good data for Danish 8X58R, BUT, it is evident there is a lot of bad excessive pressure data on the internet!


No!
The krag will take "almost" anything you'll throw at it.
The problem is all the old black powder Remington Rolling Blocks that were converted to this caliber (Norway, Sweden, Denmark), they tend to self destruct when exposed to full house loads.

Nominal 8x58RD for Krags is 38,2kpsi and only 23,5kpsi for the old rollers.


  (You need to Login
  (You need to Login


  (You need to Login
Double Dutch to you but the Danish words say roughly: Middlepressure not to exceed 34,2kpsi and no MAX. pressure to exceed 41,2kpsi.
So if you squeeze the lemon then max. pressure is 41,2kpsi as that was deemed safe back then!

Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.