Krag Collectors Association Forum Archive | |
General >> Chit-Chat (for poking fun and off topic subjects) >> FWIW - Easy Krag Bolt Removal
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1566327261 Message started by butlersrangers on Aug 20th, 2019 at 6:54pm |
Title: FWIW - Easy Krag Bolt Removal Post by butlersrangers on Aug 20th, 2019 at 6:54pm
Something I read today on the KCA Forum left me thinking some members have difficulty removing Krag bolts.
It is not hard to remove a Krag Bolt, (although some Krags have stiffer extractors than others). It is a matter of 'technique and timing'. The legendary "Parashooter" does it so quickly in his video, that I don't know how he does it! My approach is easy and just requires a strong right thumb (and ignoring minor momentary pain). By the numbers: 1. Open your Krag's bolt and draw it to the rear until the 'hold-open pin' latches in its receiver notch. 2. Hold your Krag like a lawnmower handle, horizontally, with the barrel pointing to the right. 3. Hold the stock so the area in front of the trigger-guard is rested against your upper belly. 4. The left fingers are 'cupped' around the stock comb and the bolt cocking-piece. The left thumb pushes against the bottom of the bolt-handle. 5. The right fingers support the stock at the side-plate. 6. The loose right thumb pushes the extractor-claw away from you. The left thumb pushes the bolt-handle, rotating the bolt counter-clockwise. 7. The inclined surface under the extractor will eventually assist bolt rotation until it stops. Rearrange your grip and remove bolt. It takes a lot more time to describe it than to do it. Installing the Bolt is even easier. Inclines and angles do the work. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |