Krag Collectors Association Forum Archive | |
Firearms >> European Krags >> Danish Krag Carbine Scout rig
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1570149602 Message started by Tom Butts on Oct 4th, 2019 at 12:40am |
Title: Re: Danish Krag Carbine Scout rig Post by madsenshooter on Dec 14th, 2019 at 4:01pm
Kwik Site makes the lowest set of rings that I have been able to find in a lot of time looking. They're so low your mount would have to be cut at the front to make room for the objective bell! Here's a 4x Redfield IER on a S&K mount for my K31 using the Kwik Site rings. I'm not sure the scope is in the right place yet, I haven't put the assembly on the rifle as of yet. I do know this is the only placement I can get with the rings because the slots on the mount are not evenly spaced. #2 in the low height department is old style Bushnell rings. The Bushnell rings are also thinner and will allow me to move the scope fore and aft as might be needed.
The old style Bushnell rings are like the ones shown in this auction. (You need to Login They are what I use with the Krag Haus mount on my rifles with the 2-7 LER scopes. Rings in the position shown didn't work out with Redfield's idea of IER. I mounted it up and had to move the scope back until the rear of the ocular bell was even with the last digit of the K31s serial number before I got proper eye relief. There was still room for ejection but one couldn't load with a charger. Oh well. The guys at my local club would allow me to shoot it scoped, but that wouldn't cut it at the Vintage Match, I'd have to put the iron sight back on. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |