Krag Collectors Association Forum Archive | |
Firearms >> Sporterized and unofficial modified Krags >> Working with some parts
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1572997660 Message started by Doco Overboard on Nov 5th, 2019 at 11:47pm |
Title: Re: Working with some parts Post by Doco Overboard on Nov 18th, 2019 at 1:14am Almost done, I have to make a stem for where the cut off is missing, point the checkering up and oil the stock some. Also have to run across a sling swivel. I had to use a milled one from a No4 rifle which actually works pretty well because the stock is a touch wider that far back from where it (the band) usually rests. Theirs no left/right play in it when its tightened down so I'll probably just leave it. Hopefully it'll be a decent shooter/deer gun. (You need to Login (You need to Login (You need to Login (You need to Login |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |