That helped, thanks. Kind of looks like both my cam surfaces are higher, Parashooter's trick will make the "B" cam higher. I do not know an easy way to make the "A" cam higher.
Just a couple of hints to improve the trigger. Everyone will mention flat stoning and polishing the sear contact surfaces, but the cam surfaces, as well as the surfaces they contact on the receiver could be helped by honing flat and polishing also. Do not forget the lube on the cams and sides of the trigger (temperature appropriate and correct quantity). The wrong lube or too much can gum things up in cold climates. Did I mention I picked tomatoes out of my garden yesterday?