butlersrangers wrote on Jan 22^nd, 2020 at 7:42am:

'Lead Snowstorm' - The rear-sight comes off by removing the two mounting screws. (Model 1901 rifle sight shown in photo). Then remove the barrel-band by sliding it forward, while compressing the band-spring. (Remember the "U" on the band goes on the right-hand side of the Krag). Remove the stock by removing the two trigger-guard screws. Now, the hand-guard can be slid down the barrel toward the muzzle. As it moves down the barrel taper, the pressure is relieved on the hand-guard's spring-clips. Coins (a Quarter and a Nickel or Penny) can be twisted into the loose hand-guard's 'spring clips' to counteract the spring pressure. This will help hold the cracked wood in position for gluing.

Ah, excellent.  I thought the little lever in front was somehow involved in removing the sight.  Need to do some familiarization with the sight.

I also seem to have misplaced my calipers.  I’ll hunt them up by the weekend hopefully and measure the front sight blade.