Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> 200yd handloads
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1582592196 Message started by Griff557 on Feb 25th, 2020 at 12:56am |
Title: Re: 200yd handloads Post by psteinmayer on Feb 26th, 2020 at 1:10am Griff557 wrote on Feb 25th, 2020 at 1:56am:
I shoot the 1902 with the Sgt Peep. I modified mine per CMP rules. The original peep aperture is painfully small at approximately 0.04 dia. I also modified a spare sight using wire gauge drills to 0.07 dia., which helped. However, that was about as large as I could go before damaging the area of the peep. Still, I wanted to get a little bigger so it would be easier to get back on target during the rapid fire phase. So I built up the plate with JB Weld, and then opened the peep up to 0.1 diameter. That really made a difference!!! |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |