Krag Collectors Association Forum Archive | |
Firearms >> European Krags >> Norwegian Krag screws
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1582749826 Message started by sixfive on Feb 26th, 2020 at 8:43pm |
Title: Re: Norwegian Krag screws Post by sixfive on Feb 28th, 2020 at 9:36pm
Hello,
Well, I tried a 8-32 die for the extractor screw and that did not work at all. It looks like for my purposes I will be sticking with a M4-.75 on the extractor screw, and 1/4-20 threads for the action screws. Since I am just making inletting guide screws and a extractor screw I will not go to the trouble and expense of ordering Whitworth dies at this time. I can't justify it for what I am doing. However if I do ever get my hands on Whitworth dies to try, or get better information on the topic, I will be sure to post my findings. Maybe some more digging in the Krag reference materials will yield some answers. Thanks to all who helped out. Regards, sixfive |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |