Krag Collectors Association Forum Archive
Firearms >> Sporterized and unofficial modified Krags >> Working on 1898 rear sight
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1585139188

Message started by Rmasters3 on Mar 25th, 2020 at 12:26pm

Title: Re: Sporterized 1896 carbine
Post by butlersrangers on Mar 26th, 2020 at 3:08am
Rmasters3 - Welcome to the KCA Forum.

The U.S. Krag model 1898 sight and model 1902 sight have a resemblance to each other and parts can interchange, but, they are really different sights.

To add further to the confusion, many model 1898 rifle sight eye-piece/leaf assemblies were altered and used in one of the variations of the 1902 sight.

The model 1898 sight has a lower base and a complex spring. The eye-piece has three sighting notches. The left-side of the leaf is smooth.

The model 1902 sight-base is taller. The leaf spring is flat and fits into a dove-tail machine into the base. The eye-piece has one sighting notch. The left-side of the leaf is serrated.

For both sight models, take-down is the same. The leaf (hinge) pin is driven left to right.

The complete 1898 or 1902 sight can be carefully clamped side-ways in a vise with wood protecting the bottom of the base and a narrow piece of wood bearing on the leaf. (I use 2 or 3 stacked popsicle sticks).

The vise is used to put a bit of tension on the leaf to counter the spring.
The pin can be easily driven-out with a brass drift (punch).
k-75-1898.jpg ( 14 KB | 0 Downloads )
krg-98_sgt_base_004_001.jpg ( 19 KB | 0 Downloads )
a_krag_1902_sightnscrews_002.jpg ( 80 KB | 0 Downloads )
krg-_02_base_003_001.jpg ( 20 KB | 0 Downloads )
Krag-1902_apart-ed.jpg ( 60 KB | 1 Download )

Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0!
YaBB Forum Software © 2000-2024. All Rights Reserved.