Krag Collectors Association Forum Archive | |
Firearms >> U.S. Military Krags >> Criterion Barrels
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1590074211 Message started by S99VG on May 21st, 2020 at 3:16pm |
Title: Re: Criterion Barrels Post by butlersrangers on May 21st, 2020 at 11:25pm
It takes some gun-smith skills and equipment to fit a Criterion barrel to a Krag action.
The Criterion Chamber requires finish reaming (for head-space) and proper 'timing' of threads, so that the factory 'extractor notch', rear-sight holes and 'flat' for front-sight base end up in correct orientation. You have to provide a front-sight base to be fitted and brazed or silver-soldered on the barrel 'flat'. Criterion barrels come drilled and taped with rear sight holes. They use a different thread. Original Krag rear-sight screws won't work. It is likely the CMP has a lengthy wait time. A replica front-sight installation will look something like the attached photo. Hopefully, somebody responds that has direct experience with a Criterion barrel Krag installation. |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |