Krag Collectors Association Forum Archive | |
General >> Ammunition, reloading, shooting, etc >> Load Suggestions
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1590426085 Message started by 7th1st on May 25th, 2020 at 5:01pm |
Title: Re: Load Suggestions Post by psteinmayer on May 25th, 2020 at 7:58pm
I normally load the Hornady 220 gr RN with the 40.0 grains of IMR-4350 and a CCI #34 mil-spec primer. I've been shooting this load in matches for ten years now! That said, I recently (a month ago) loaded some Hornady 178 gr A-Max bullets with 44.6 grains of H4831SCl. I'm told this might be a somewhat reduced charge with this powder and bullet combination. Here's the thread where we discussed this load: (You need to Login
I haven't made it to the range to try this load out... but I will hopefully soon. My reason for this is because although my 220 grain round does well enough, I really want to try and tighten up my groupings. I have a friend who routinely shoots in the 290s with his 1896 Krag at Perry, and he shoots a very light load with a 150 grain RN bullet (he told me his load, and I can't for the life of me remember it). I tried his load, but it wouldn't group very well in my Krag, so I stuck with my 220s. By the way, Parashooter is pretty much the Guru around here when it comes to load data and powders! |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |