Krag Collectors Association Forum Archive | |
Firearms >> Sporterized and unofficial modified Krags >> Extractor in the way of bolt face.
http://www.kragcollectorsassociation.org/cgi-bin/yabb2/YaBB.pl?num=1591031387 Message started by Legion on Jun 1st, 2020 at 5:09pm |
Title: Re: Extractor in the way of bolt face. Post by butlersrangers on Jun 1st, 2020 at 9:01pm
It is possible that your "Go" Gauge rim is too large in diameter and hanging-up on the Bolt "flange" and not fully seating against the Bolt-Face.
Your "No-Go" gauge, since it is beveled, is seating deeper into the Bolt and likely in contact with the Bolt-Face. Head-Space Gauges need to be in contact with the Bolt-Face to give a valid reading. Don't force anything ... light touch only! (My hunch is that you do not have a headspace issue). |
Krag Collectors Association Forum Archive » Powered by YaBB 2.6.0! YaBB Forum Software © 2000-2024. All Rights Reserved. |