Krag Collectors Association Forum Archive - System Information

(UTC)

Krag Collectors Association Forum Archive › General › Older threads › Krag assembly/disassembly

(Moderators: Ned Butts, Tom Butts, KCA Forum Admin)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Krag assembly/disassembly (Read 8948 times)

Marine 3 KCA Forum Member Offline Krag Enthusiast! Posts: 3 Joined: Feb 23^rd, 2010	Krag assembly/disassembly Feb 23^rd, 2010 at 8:11pm	Print Post
	Where can I get detailed assembly/disassembly directions for my 1898 Krag? Thanks, Marine 3


	IP Logged

thudhugger KCA Forum Member Offline Krag Enthusiast! Posts: 8 Joined: Oct 3^rd, 2009	Re: Krag assembly/disassembly Reply #1 - Feb 23^rd, 2010 at 9:48pm	Print Post
	try surplusrifle.com - on left of screen scroll down and choose us krag rifle then on the next screen on the far right there is bolt and rifle disassembly instructions. Thud


	IP Logged

Marine 3 KCA Forum Member Offline Krag Enthusiast! Posts: 3 Joined: Feb 23^rd, 2010	Re: Krag assembly/disassembly Reply #2 - Feb 24^th, 2010 at 12:09am	Print Post
	Thud, Thanks for the quick answer. I will try it I have an 1898 Krag that is missing its ejector and ejector pin. All else seems OK. Can you tell me a good source for replacement parts? Is it a hard fix? What problems might I run into? Thanks, Marine 3 Tennessee


	IP Logged

thudhugger KCA Forum Member Offline Krag Enthusiast! Posts: 8 Joined: Oct 3^rd, 2009	Re: Krag assembly/disassembly Reply #3 - Feb 24^th, 2010 at 5:19am	Print Post
	Marine, The Krag comes apart fairly easy, the bolt takes a little getting used to but that comes with practice.� I found a couple of ejectors and pins on Ebay (just type "krag" in search window).� The other ideas would be gunbroker.com or auctionarms.com� I'm in the hunt for a new ejector myself, mine appears to be handmade. Thud


	IP Logged

Marine 3 KCA Forum Member Offline Krag Enthusiast! Posts: 3 Joined: Feb 23^rd, 2010	Re: Krag assembly/disassembly Reply #4 - Feb 27^th, 2010 at 2:29pm	Print Post
	Thud, So far no luck in finding Kag ejectors and pins for my 1898. If you are looking also, let me know if you find another source. Thanks, Marine 3


	IP Logged

Tom Butts KCA Forum Admin KCA Official Member Offline Krag enthusiast! Posts: 347 Location: New York State Joined: Apr 1^st, 2002 Gender:	Re: Krag assembly/disassembly Reply #5 - Mar 1^st, 2010 at 2:28am	Print Post
	Check our classifed section at our homepage at [url=www. kragcollectorsassociation.org]www. kragcollectorsassociation.org[/url] then go to the classifeds section. Check out Dan Lowery's ad at the top of the classifieds section. Best regards, Tom


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›

Bookmarks:

del.icio.us

Digg

Google

Google+

reddit

StumbleUpon

Yahoo