Dave:

Unless you're going to reload .50 Cal, the RCBS Rock Chucker is about the golden standard.  It is a simple (very heavy duty) single stage press but will do most any caliber well.  The pricer is right also.

Carl D.

I've gone the Lee Reloader set-up. The simple press is under $30 and I can get the dies for many calibers. The web site be Lee has reloading videos. A good starting point for a beginner that doesn't want to go invest a lot of money and will still be able to reload rounds that are better than buying complete cartridges. Some will disagree, but it is still a good American value.

The basic Lee Turret Press with the 'quick-change' turrets is the press I use the most.  (I also have a strong RCBS single station press).  I have various makes of Dies and they all work well with the Lee Press.  I own a bunch of the 3-position turrets and once I have set-up for a caliber, I leave it assembled.  To change to a different cartridge, you simply change Turrets and Shell Holders.  The Lee presses are strong enough, inexpensive, repairable, warranted, and commonly available.  Also, I normally just neck-size cases for my bolt guns.  I like to prime my cases with the Lee hand tool with an attached primer tray.

When you have a Full Length Re-Sizing Die screwed all the way into the press so it makes contact with the shell holder, the die full-length re-sizes the case.  This means it returns it to factory dimensions.  If you are reloading ammunition with cartridge cases that were fired in your rifle, the brass case has expanded to close to the dimensions of your rifle's chamber.  It is unnecessary to fully resize the case and needlessly works and stretches the brass case.  Backing-off the Die, a turn or two from being fully threaded into the press, allows the Die to just resize most of the case neck and not touch the rest of the case.  This practice has accuracy advantages and makes for longer case life (more reloadings).  It is worth while to get a reloading manual and read the begining chapters on reloading basics before investing in equipment.