Krag Collectors Association Forum Archive - System Information

(UTC)

Krag Collectors Association Forum Archive › Firearms › Other Firearms › Sporterized 1899 Rem.Lee

(Moderators: Tom Butts, Ned Butts, KCA Forum Admin)

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Sporterized 1899 Rem.Lee (Read 2252 times)

32-20 KCA Forum Member Offline Krag Enthusiast! Posts: 5 Joined: Sep 17^th, 2009	Sporterized 1899 Rem.Lee May 11^th, 2016 at 10:58am	Print Post
	Just picked up a sporterized Remington Lee 30-40.Noticed there is no screw holding the barrel down in the fore arm,is it ok to shoot it like this ? Will only be shooting mild cast loads.


	IP Logged

butlersrangers KCA Forum Member Offline Krag Enthusiast! Posts: 6330 Location: Michigan Bi-Peninsular&Proud Joined: Oct 7^th, 2009	Re: Sporterized 1899 Rem.Lee Reply #1 - May 11^th, 2016 at 1:17pm	Print Post
	Is there provision for a forearm screw? FWIW - If you are concerned about the barrel lifting and stressing the stock, improvise a 'barrel-band' with a couple of wraps of masking tape, prior to your Range Sessions.


	IP Logged

32-20 KCA Forum Member Offline Krag Enthusiast! Posts: 5 Joined: Sep 17^th, 2009	Re: Sporterized 1899 Rem.Lee Reply #2 - May 11^th, 2016 at 7:45pm	Print Post
	No provision for fore arm screw as it has the original military barrel that used bands. Tape sounds like a good idea.


	IP Logged

Page Index Toggle

Pages: 1

‹ Previous Topic | Next Topic ›