Happy New Year everyone.  I've been lurking for a while attempting to learn a bit more about my new Krag and realized this may be the place for me.  My 90 year old Great Uncle, a WWII Seabee veteran, gave me his 1898 Krag over the holidays.  When I asked for the backstory and the history, he mentioned that it (and 4 others) were acquired during the early 70's, possibly as a result of a extended evening of poker playing.  Nevertheless, my local gun shops couldn't give me the details like I've found on this site, so I'm hoping your well trained eyes might shed a little light on what I've been given.  He's a wonderful man and I have no plans to sell it as it has now become priceless.   Thanks very much.  Pics to follow.

Welcome to the forum... and to the wonderful world of Krags!

Can't access the pictures.  You could try just posting them here.  If they're too big, you may need to reduce them.

..more..

Well, that's a very nice looking 1898.  You have the 1896 rear sight which is most likely what it had originally.  It looks like it might have been plated and polished for ceremonial duty... perhaps with a VFW or American Legion.  How's the bore? 

To clean it, just do like you would any other rifle.  I always remove the bolt and clean from the receiver end with a long rod (prevents undue muzzle wear).  I use Hoppe #9 and a bronze brush to scrub, then swab and oil with Remington oil.  To remove the bolt, lift up on the extractor while turning the bolt to the left and back.  Install in reverse order.  Further disassembly is not difficult... but you must NEVER try to snap off the handguard.  Remove the barreled action from the stock, and remove the rear sight.  Then, SLIDE the handguard off the barrel.  Assemble in reverse.  Removal of the loading gate and such is not normally necessary for cleaning unless you have a problem.  I perform a full disassembly about once a year to check things out, clean and lube.  Otherwise, I usually just clean the bore and action.

I shoot my Krag every month in Vintage Rifle Matches.  Yours could be a great candidate for that also!

Very Cool Rifle, It will be interesting if you can find out where it was acquired and how it came to wear that interesting finish. Thanks for sharing.

Man, what great info.  Can't thank you enough.  I will try the .30-06 shell and see what happens.  The bore looks good but could use a thorough cleaning.  Really appreciate the disassembly info as well.  Thanks!!!!

Just read this interesting post. I have seen a number of ceremonial rifles used in parades and legions, etc. I bought an Enfield a few years back that must have been used just for marching or ceremonies because it had the firing pin broken off and the front of the firing pin hole was welded closed. Had to buy a replacement bolt and then all worked well.

So, make sure the firing pin is correct and works properly. Hope it shoots well!

Nice story.  Glad the 30-06 wouldn't chamber. 
Vic