Page Index Toggle Pages: 1 Send TopicPrint
New member Help me Identify and restore this Krag (Read 2557 times)
Oldman04
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 2
Joined: Feb 9th, 2019
New member Help me Identify and restore this Krag
Feb 12th, 2019 at 4:37pm
Print Post  
Hello Folks! I have had this Krag for a few years now and I just don't know too much about it.  I would like to return it to original condition or as close as I possibly can.  But seeing that I don't know as much about Krags as I should I figured I would pick y'alls brains.
So here is what I do know
-Receiver 1898 with a 127027 Serial number
-Cut off gate removed and replaced by Pacific peep sight.
-Barrel is 22" with aftermarket sight.  Rear sight holes are ~ 2 3/8" spaced.
-No readable stock markings. I can see traces of where they were but looks like they have been sanded down.
-Stock is a cut down rifle length.
Shoots great and shiny bore.

Thanks in advance for any help.  I would appreciate and help or insights helping me with my restoration project.


  
Back to top
 
IP Logged
 
butlersrangers
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 6330
Location: Michigan Bi-Peninsular&Proud
Joined: Oct 7th, 2009
Re: New member Help me Identify and restore this Krag
Reply #1 - Feb 12th, 2019 at 5:38pm
Print Post  
(another) 'Oldman' - Welcome to the KCA forum.

You have a nice Krag, that was cut-down from a U.S. model 1898 infantry rifle to make a useful Hunting Rig. This was commonly done from the late 1920's to the 1940's.

Enjoy it as is. It is economically impractical to attempt a restoration.

You could easily put $700 into parts, (plus cost of labor), to have a $650 Krag, that nobody wants.

Save and use your money to buy a complete and historically correct Krag, if that is what you want.

Shoot and enjoy this one, in its current state, because it will be accurate and fun! It is hard to find Krags with fine bores.

BTW - Your Krag, #127027, was originally assembled at Springfield Armory, around September, 1898.
« Last Edit: Feb 12th, 2019 at 7:59pm by butlersrangers »  
Back to top
 
IP Logged
 
Parashooter
KCA Forum Member
*
Offline


Kragmudgeon

Posts: 514
Location: Connecticut
Joined: Feb 4th, 2010
Re: New member Help me Identify and restore this Krag
Reply #2 - Feb 12th, 2019 at 7:03pm
Print Post  
Many thanks! These are very interesting articles to me. Are you able to post the additional pages that appear to be missing?
  
Back to top
 
IP Logged
 
butlersrangers
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 6330
Location: Michigan Bi-Peninsular&Proud
Joined: Oct 7th, 2009
Re: New member Help me Identify and restore this Krag
Reply #3 - Feb 12th, 2019 at 7:46pm
Print Post  
'Parashooter' - Here are three more pages. 

I have switched them around to put things in correct order, but, I don't have the very end of the article.

(IIRC - One of the KCA 'regulars' originally posted this article and deserves credit, but, I can't remember, who? - Sorry).
  
Back to top
 
IP Logged
 
Whig
KCA Official Member
***
Offline


Krag Enthusiast!

Posts: 1324
Location: Balt MD
Joined: Sep 24th, 2016
Gender: Male
Re: New member Help me Identify and restore this Krag
Reply #4 - Feb 12th, 2019 at 8:17pm
Print Post  
Old Man- as Butlersrangers says above, it will be expensive and difficult to restore your nice sporterized Krag to its original condition. It actually cannot ever fully be returned to original condition, just restored to close to where it originally was. There is no collectors value to such a "restored" Krag. Sporterized Krags are plentiful and usually are valued at $300-450, depending on overall condition including the condition of the bore.

There are many great sporterized Krags that are shot regularly and rather enjoyed as such. They can be extremely accurate and fun to shoot. Many sporterized Krags can shoot better than unaltered Krags, so, no fret.

And, if you want to venture into the wide world of collectible Krags, save up $800- $1,000 to get one that is still in original military configuration. They are out there at auctions, gun stores and online places like Gun Broker.

Word of advice we all have been given - buy a reference book or two on Krags and read up on great sites like this one to learn what is out there before buying. Many of us have learned the hard way by buying something that we didn't understand just to learn that it was a bad choice that we should have studied beforehand.

So, ask any questions here and you'll get lots of great answers.

Welcome to Krag-Land!
  
Back to top
 
IP Logged
 
Parashooter
KCA Forum Member
*
Offline


Kragmudgeon

Posts: 514
Location: Connecticut
Joined: Feb 4th, 2010
Re: New member Help me Identify and restore this Krag
Reply #5 - Feb 12th, 2019 at 9:55pm
Print Post  
butlersrangers wrote on Feb 12th, 2019 at 7:46pm:
'Parashooter' - Here are three more pages. 

I have switched them around to put things in correct order, but, I don't have the very end of the article.

Thank you again!

The final paragraph posted has the best instructions I've seen for how to study and alter the trigger pull. For those who don't want to alter their original parts, the attached image may be useful. Requires only simple hand tools and a paper clip -
  
Back to top
 
IP Logged
 
Oldman04
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 2
Joined: Feb 9th, 2019
Re: New member Help me Identify and restore this Krag
Reply #6 - Feb 12th, 2019 at 11:21pm
Print Post  
Thanks for the replies guys! Looks like I got a little learning to do and a few more rifles to buy. (not that I needed another excuse)
  
Back to top
 
IP Logged
 
Whig
KCA Official Member
***
Offline


Krag Enthusiast!

Posts: 1324
Location: Balt MD
Joined: Sep 24th, 2016
Gender: Male
Re: New member Help me Identify and restore this Krag
Reply #7 - Feb 13th, 2019 at 2:50am
Print Post  
Stick with us and we'll help you spend your money the right way!
  
Back to top
 
IP Logged
 
cquickel
KCA Forum Member
*
Offline


Krag Lover

Posts: 77
Location: Arkansas
Joined: Jan 11th, 2017
Gender: Male
Re: New member Help me Identify and restore this Krag
Reply #8 - Feb 14th, 2020 at 8:28pm
Print Post  
You mind if I add your rifle to the KCA serial number database?
  

Curt Quickel
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint