Page Index Toggle Pages: 1 Send TopicPrint
FINALLY got a Norwegian Krag. (Read 6575 times)
Plain Old Dave
KCA Forum Member
*
Offline


Krag Collector!

Posts: 24
Joined: Dec 31st, 2006
FINALLY got a Norwegian Krag.
Jul 3rd, 2015 at 2:38am
Print Post  
1915 M94. The fellow I got it from said he had had it 50 years and never fired it, and I tend to believe him. Had all sorts of grease on the bolt and in the barrel, and I am slowly but surely cleaning it out. I think this piece has never been refinished, as in normal light you can see the striations in the steel where the receiver was machined. Front to back in the section where the fillet is, and round and round on the receiver ring. I have seen quite a few with the 'crease' you see in the one pic, and the receiver changes radius right there. Had the thing completely apart and examined carefully under strong light and 4x magnification. I am a Navy AO and before that I was a GMG, and have a few 'tricks' to find defects. Just had to brag for a few. Hopefully I will get all the crud out of the bore before my pending recall to active duty next month. I think there's a decent bore under all the gunk.
  

Chattanooga Strong.
Back to top
 
IP Logged
 
butlersrangers
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 6330
Location: Michigan Bi-Peninsular&Proud
Joined: Oct 7th, 2009
Re: FINALLY got a Norwegian Krag.
Reply #1 - Jul 3rd, 2015 at 3:51am
Print Post  
Plain Old Dave: That's a handsome looking Krag from Norge. I hope the bore is fine and everything matches.

Thanks for sharing, and especially, Thank You for your service!
  
Back to top
 
IP Logged
 
psteinmayer
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 2391
Location: Ypsilanti, Michgan
Joined: Aug 30th, 2011
Gender: Male
Re: FINALLY got a Norwegian Krag.
Reply #2 - Jul 3rd, 2015 at 11:03am
Print Post  
Great find Dave...  From one former sailor to another (former AS2 here)!  Bring her out and give her a dance!
  
Back to top
IP Logged
 
Plain Old Dave
KCA Forum Member
*
Offline


Krag Collector!

Posts: 24
Joined: Dec 31st, 2006
Re: FINALLY got a Norwegian Krag.
Reply #3 - Jul 3rd, 2015 at 10:17pm
Print Post  
Been cleaning on this Krag today and learned a few things.

1. Norwegian Krags are as averse to grease on the bolt parts as US Krags are. A light oil like Rem Oil is much better in general, with a light coat of grease on the bolt cam.

2. The Magazine Cutoff works opposite the one in my US 1896 Krag. Down turns the magazine on.
  

Chattanooga Strong.
Back to top
 
IP Logged
 
reincarnated
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 562
Joined: Mar 11th, 2012
Re: FINALLY got a Norwegian Krag.
Reply #4 - Jul 4th, 2015 at 12:54am
Print Post  
I'm curious about the bore.  Many of the imports were advertised as "salt & pepper bores; where the salt did not pit the bore, the pepper did".

Which way does the cutoff work on Danish Krags?

Waterman (once upon a time a MN3)
  
Back to top
 
IP Logged
 
Plain Old Dave
KCA Forum Member
*
Offline


Krag Collector!

Posts: 24
Joined: Dec 31st, 2006
Re: FINALLY got a Norwegian Krag.
Reply #5 - Jul 4th, 2015 at 3:18am
Print Post  
The bore is very strong. I have seen a number of NKs with atrocious bores, and this one has very well defined lands with what we now call light frosting. That might just be crud that hasn't come off the steel yet, though.
  

Chattanooga Strong.
Back to top
 
IP Logged
 
Ned Butts
KCA Forum Admin
KCA Official Member
*****
Offline


Krag enthusiast!

Posts: 525
Location: western catskills NY
Joined: Apr 1st, 2002
Gender: Male
Re: FINALLY got a Norwegian Krag.
Reply #6 - Jul 4th, 2015 at 12:41pm
Print Post  
That is a fine example! Congratulations on the find. I really like my US Krags but my Norwegians are my favorite! IMHO the top of the Krag line!
And thank you for your service!!!!
  
Back to top
 
IP Logged
 
Plain Old Dave
KCA Forum Member
*
Offline


Krag Collector!

Posts: 24
Joined: Dec 31st, 2006
Re: FINALLY got a Norwegian Krag.
Reply #7 - Jul 6th, 2015 at 1:14pm
Print Post  
Not trying to restart an old debate. Read pretty thoroughly on this topic, and it really looks like shooting standard 6.5x55 through an NK is like shooting .38-44 High Velocity (basically a modest .357 Magnum in .38 Special cases)through a prewar Smith and Wesson Military and Police .38 Special or the old .32-20 Winchester High Velocity "rifle only" loads through a .32-20 of similar vintage. Sure you might be able to get away with it, but it will eventually cause something to fail. The 1894 non-Steyr long rifles are known to develop stress fractures at 2 points on the reciever under extended exposure to Mauser-intensity pressures, @40k psi is the commonly accepted maximum to avoid this.

So, a question for the Norwegians: What are some of your "go-to" loads for 6.5x55 that won't overstress a Krag? By "go-to" load, I mean one that shooters just use and doesn't require much if any load development; in US National Match shooting, 46 grains of IMR4895 in a .30-'06 behind a 168-170gr bullet was the standard M1 Garand load when people still shot the M1 competitively.
« Last Edit: Jul 6th, 2015 at 4:19pm by Plain Old Dave »  

Chattanooga Strong.
Back to top
 
IP Logged
 
butlersrangers
KCA Forum Member
*
Offline


Krag Enthusiast!

Posts: 6330
Location: Michigan Bi-Peninsular&Proud
Joined: Oct 7th, 2009
Re: FINALLY got a Norwegian Krag.
Reply #8 - Jul 6th, 2015 at 3:20pm
Print Post  
IMHO - I really think this gets over thought. I think the greatest danger is 'under loads' that risk Detonation.

I would use 'starting' loads, for 6.5X55 Swede, from an up-to-date manual, like Hornady's and use medium burning powders like IMR-3031, 4895, or 4064. A good way to lower pressures and not have bullets strip is to use 140 grain bullets.

I once had a Greek Mannlicher-Schoenauer, in 6.5X54mm, that had a very rough bore. 160 grain bullet loads would tumble and 'keyhole', but, with 139 grain spitzer bullet reloads, the rifle was a 'tack-driver'.
« Last Edit: Jul 7th, 2015 at 5:16am by butlersrangers »  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint