I picked up my second Krag today after a long search of gun stores looking for a "correct" Krag.  My first one was a cut down with 1903 front sight.

It's a 1898 model with a 1900 cartouche, serial number 271606 which should be correct year for 1900.  It's in decent shape with just a little rust in bore, nice patina on metal, but some rusty spots here and there.

Assuming it shoots and functions correctly, I would like to take it to Camp Perry next year for the Roosevelt match.  The rear sight looks to me to be a 1896.  I'd like to swap this out with a rear sight with windage adjustment.  Which rear sight with windage adjustment would be "correct" for this rifle?

Whether you use a 1901 or 1902 can be subjective based on your individual tastes.  I personally prefer the 1902 with the Sgt. Peep extended.  Many shooting in matches prefer the 1901.  My advice would be to research the two sights and find what would work best for your needs.  If you install the 1901, and then find you would rather have a 1902, you're going to have to purchase another hand guard and rear sight!!! 

Also, if you're going to shoot in matches (Roosevelt or Vintage), you'll need to decide if you'll use the peep or not.  The Peep on Krag sights is unbelievably small (0.04), however you can legally alter the rear sight per CMP rules to enlarge the peep up to 0.1.  The Sgt. Peep on the 1902 sight can only be enlarged to around 0.07 before you damage the plate... but that is sufficient to make the sight very useable... and accurate!!!

Finally, if you intend on shooting your Krag in matches, there will be no shortage of people here (yours truly included) to help you get started!

Paul

Thanks for the reply's.  I may swap the hand guard and 1901 sight on my cut down "carbine" and give it a try.

Ned, is there a place if can use to figure out the correct front sight blade height?

Thanks again!

Edit: Looked around, looks like 0.43" is correct.  Also know understand difference between 1901 and 1902 sights - some I looked at did not show the peep on the 1902, all I saw was the notch.  Not having to flip up the ladder like on the 1901 to use peep is handy when using a hat - had that issue with the M1917 in a match!!!!    Then again, the sight is much further out....

Edit:  Holy smokes, 1902 handguard cost's more than the 1902 rear sight!  Can anyone steer me towards more reasonable handguards?  Maybe where one can buy the set?

FYI:

Lt. Col. William S. Brophy measured a sampling of Krag front-sight blades and illustrated the results in his book, "The Krag Rifle", page114.

1892 Rifle (rear sight) - front sight blade = .275" high

1896 Rifle (rear sight) - front sight blade = .286" high

1898, 1901, 1902 Rifle (rear sights) - front sight blade = .413" high

1896 Carbine (rear sight) - front sight blade = .266" high

1898, 1901, 1902 Carbine (rear sights) - front sight blade = .355"

(Note: These measurements are just the blade height and do not include the height of the Krag base, that was dovetailed and brazed to the barrel. The base was identical on all issued U. S. Krag models).

IMHO - It is very likely there are some 'issued' Krag front-sight blades that were probably filed and altered by Armorers and Match Shooters, to adjust the elevation of the point of impact.

Another minor problem in switching rear sights, is the issue of the correct screws.  (The 1901 sight requires a peculiar front screw. The 1892 & 1896 sights have a longer front screw). The various 'short' screws will generally interchange.

Reproduction sight screws and sight blades can be purchased from S&S Firearms, Glendale, N. Y.

The KCA Classifieds list a vendor, who makes reproduction hand-guards. The reproductions are expensive and not as nice or close fitting as a good original, but, better than nothing.

There are also parts sellers listed in Classifieds, who might be able to help with original items.

Just two..............just wait

I'd love to do that!!!  I love all of my mil-surp rifles (Krags, Garand, 1903A3, TDs, K-31, and even the couple Arisakas I have)... but my heart belongs to my 1898 Rifle!

You should plan on squadding with Bob and I for vintage, Springfield, Garand, and Roosevelt in 2017!